Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #11

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Removing the power supply shield
[* black] On the right side of the monitor, remove the screw securing the power supply shield. You also want to remove the screw on the top that's below the panel PCB.
[* black] Lift the lower plate up while removing the power supply shield to remove it from the monitor to get to the power supply. There
[* icon_note] While removal
is no need to completely remove the platenot required, it can ease reassembly, If you lifted upwish to do this. However, if you choose to you can do so by unlatchingthis, unclip it from the panel frameplastic tabs on the frame of the monitor.
[* black] Lift the lower plate up while removing the power supply shield to remove it from the monitor to get to the power supply. There
[* icon_note] While removal
is no need to completely remove the platenot required, it can ease reassembly, If you lifted upwish to do this. However, if you choose to you can do so by unlatchingthis, unclip it from the panel frameplastic tabs on the frame of the monitor.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão