Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações neste passo

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Starting the repair: Cleaning the solder
[* black] Now it is time to clean theClean the old soldersolder and flux from the board. To do this, use a desoldering braid to remove excess solder for the capacitor group you are replacingbraid. Put the desoldering braid on top ofover the pad,area you want to clean and heat it up with a soldering iron.
[* black] Once all of the old solder you can get is clean and the hole can accept a new capacitorcleaned up, lift the desoldering braid up. It is important toup with the soldering iron. If you do this while the braid is hot ornot do this, it will stick to the boardsolder pad.
[* black] Now it is time to clean theClean the old soldersolder and flux from the board. To do this, use a desoldering braid to remove excess solder for the capacitor group you are replacingbraid. Put the desoldering braid on top ofover the pad,area you want to clean and heat it up with a soldering iron.
[* black] Once all of the old solder you can get is clean and the hole can accept a new capacitorcleaned up, lift the desoldering braid up. It is important toup with the soldering iron. If you do this while the braid is hot ornot do this, it will stick to the boardsolder pad.