Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações neste passo

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Starting the repair: Cleaning the solder
[* black] LayTo clean the old solder, use a desoldering braid on top ofover the pads where solder has beaded upthe old capacitors were removed. Put the irondesoldering braid on top of the desoldering braid to wickpad, and heat it up with a soldering iron. The solder will go into the wick. Once all of the old solder up and removehas been removed, lift it off the pad with the soldering iron attached tostill on the braid. The flux used to remove the caps should suffice in assisting this.
[* black] LayTo clean the old solder, use a desoldering braid on top ofover the pads where solder has beaded upthe old capacitors were removed. Put the irondesoldering braid on top of the desoldering braid to wickpad, and heat it up with a soldering iron. The solder will go into the wick. Once all of the old solder up and removehas been removed, lift it off the pad with the soldering iron attached tostill on the braid. The flux used to remove the caps should suffice in assisting this.