Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #15

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[*title] Starting the repair: Removing the old capacitors
[*
black] Put the soldering iron on the points where the bad capacitor(s)old capacitors are soldered, and pushwhile pushing on the capacitor to remove itit not touching the soldering iron. Removal of the old capacitors doesn't have to be pretty nowpretty, because we will have to remove the old solder. If you need a guide on soldering, refer to this: [guide|750]
[* icon_reminder] The best way to avoid touching the soldering iron is to use a grip or lifting the board up where the soldering iron is away from your hand.

[* icon_note] A full recap should be performed as preventive repair work for any future failures capacitor failures, since Acer uses CapXon capacitors in their displays, and when CapXon capacitors fail, others follow quickly.
[* icon_reminder] lifting
now. This is because the board up with one hand and removing the old capacitor as you go makes this much easiercapacitors will continue to do.
[* icon_note] Here
fail until they are all replaced. This is how to solder the new capacitor in: [guide|750]especially common with low quality capacitors.
[*title] Starting the repair: Removing the old capacitors
[*
black] Put the soldering iron on the points where the bad capacitor(s)old capacitors are soldered, and pushwhile pushing on the capacitor to remove itit not touching the soldering iron. Removal of the old capacitors doesn't have to be pretty nowpretty, because we will have to remove the old solder. If you need a guide on soldering, refer to this: [guide|750]
[* icon_reminder] The best way to avoid touching the soldering iron is to use a grip or lifting the board up where the soldering iron is away from your hand.

[* icon_note] A full recap should be performed as preventive repair work for any future failures capacitor failures, since Acer uses CapXon capacitors in their displays, and when CapXon capacitors fail, others follow quickly.
[* icon_reminder] lifting
now. This is because the board up with one hand and removing the old capacitor as you go makes this much easiercapacitors will continue to do.
[* icon_note] Here
fail until they are all replaced. This is how to solder the new capacitor in: [guide|750]especially common with low quality capacitors.