Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #15

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Remove the old capacitors
[* icon_caution] '''''Use of a Helping Hands is recommended to avoid soldering iron contact. If you do not have one, hold the board at an angle.'''''
[* icon_reminder] '''''While a partial replacement may work, the remaining capacitors will fail.''''' Change the entire setthem all while it is apart. '''''Refer to this guide for soldering tips: [guide|750].'''''
[* icon_reminder] '''''While a partial replacement may work, the remaining capacitors will fail.''''' Change the entire setthem all while it is apart. '''''Refer to this guide for soldering tips: [guide|750].'''''
[* black] '''''Move to a workspace with ventilation or use a fume extractor.''''' Once in an appropriate workspace, desolder the old capacitors. Heat up each leg and remove it.
[* black] After removing the capacitors, clean up the old solder with a desoldering braid. '''''Lift it with the iron when removing it.'''''