Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #15

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Remove the old capacitors
[* icon_caution] '''''IfUse of a Helping Hands is recommended to avoid soldering iron contact. If you do not have Helping Hands, be careful not to touch your soldering iron. Theone, hold the board can be held at an angle if this is easierangle.'''''
[* icon_note] While it may be possible to doicon_reminder] '''''While a partial replacementreplacement may work, the remaining capacitors will fail. Do it once and changefail.''''' Change the entire setset while it is apart. '''''Refer to this guide for soldering tips: [guide|750].'''''
[* black] '''''Move into a workspace with ventilation or use a fume extractor.''''' Once in an appropriate workspace, desolder the old capacitors. Heat up theeach leg toand remove it from the boardit.
[* black] After removing the capacitors, clean up the old solder with a desoldering braidbraid. '''''Lift it with the iron when removing it.'''''
[* icon_caution] '''''IfUse of a Helping Hands is recommended to avoid soldering iron contact. If you do not have Helping Hands, be careful not to touch your soldering iron. Theone, hold the board can be held at an angle if this is easierangle.'''''
[* icon_note] While it may be possible to doicon_reminder] '''''While a partial replacementreplacement may work, the remaining capacitors will fail. Do it once and changefail.''''' Change the entire setset while it is apart. '''''Refer to this guide for soldering tips: [guide|750].'''''
[* black] '''''Move into a workspace with ventilation or use a fume extractor.''''' Once in an appropriate workspace, desolder the old capacitors. Heat up theeach leg toand remove it from the boardit.
[* black] After removing the capacitors, clean up the old solder with a desoldering braidbraid. '''''Lift it with the iron when removing it.'''''