Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #15

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Remove the old capacitors
[* icon_caution] '''''If you do not have a Helping Hands, be careful not to touch your soldering iron. Try holding theThe board can be held at an angle to makeif this is easier.'''''
[* icon_remindericon_note] While it may be possible to do a partial capacitor replacement, the remaining capacitors will also fail - dofail. Do it once and do it correctlychange the entire set. '''''Refer to this guide for soldering tips: [guide|750].'''''
[* black] '''''Move in a workspace with ventilation or use a fume extractor.''''' Once in an appropriate workspace, desolder the old capacitors. Heat oneup the leg up andto remove it from the capacitor. Do this for both legsboard.
[* black] After removing the capacitors, clean up the old solder. To do this, takesolder with a desoldering braid and clean up'''''Lift it with the solder from the pads. '''''The desoldering braid must be lifted up with your soldering ironiron when removing it.'''''
[* icon_caution] '''''If you do not have a Helping Hands, be careful not to touch your soldering iron. Try holding theThe board can be held at an angle to makeif this is easier.'''''
[* icon_remindericon_note] While it may be possible to do a partial capacitor replacement, the remaining capacitors will also fail - dofail. Do it once and do it correctlychange the entire set. '''''Refer to this guide for soldering tips: [guide|750].'''''
[* black] '''''Move in a workspace with ventilation or use a fume extractor.''''' Once in an appropriate workspace, desolder the old capacitors. Heat oneup the leg up andto remove it from the capacitor. Do this for both legsboard.
[* black] After removing the capacitors, clean up the old solder. To do this, takesolder with a desoldering braid and clean up'''''Lift it with the solder from the pads. '''''The desoldering braid must be lifted up with your soldering ironiron when removing it.'''''