Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Alterações neste passo

Edição por Nick

Edição aprovada por Nick

Sem alteração

Linhas de Passo

[* black] Put the desoldering braid on the leads of the capacitor, then press the soldering iron down on the soldering braid. Do this for both leads till the solder is all gone.
[* icon_caution] Make sure it gets to at least 400 Degrees Ferenhight due to the use of lead free solder.
[* icon_note] You can also use a solder vacuum too if the desoldering braid doesn't work for you.
[* icon_reminder] The reason this is done is to avoid excess solder over the existing joints becoming a problem and making it more likely to short.