Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #14

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[*title] Starting the repair: Add flux to the leads
[*
black] Put solder flux on the leads of the bad capacitor. This will help flow the old solder to make removing the old solder easier. If you do not have flux, you can use fresh solder to do this too.
[* icon_note] You will have to put flux on a few times during this repairrepair due to the age of the solder. Put flux on as often as you need. Use more then this, too and doTry not be afraid to put it on liberallyuse too much, as this will complicate the cleaning process later.
[*title] Starting the repair: Add flux to the leads
[*
black] Put solder flux on the leads of the bad capacitor. This will help flow the old solder to make removing the old solder easier. If you do not have flux, you can use fresh solder to do this too.
[* icon_note] You will have to put flux on a few times during this repairrepair due to the age of the solder. Put flux on as often as you need. Use more then this, too and doTry not be afraid to put it on liberallyuse too much, as this will complicate the cleaning process later.