Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #14

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Starting the repair: Add flux to the leads
[* black] Put soldersome flux on the leads of the bad capacitorold capacitors. This will help flowmelt the old solder to make removingon the old caps with less effort, without adding new solder. solder easier.flux on the leads of the bad capacitor.
[* icon_reminder]
If you do not have flux to do this, you can useflux, adding a small amount of fresh solder to do this toowill make the old solder melt as well.
[* icon_note] You will have to putApply flux on a few times during this repair due to the age of the solder. Put flux on as often as you need. Tryrepair. Do not to use too much, as this willmay complicate the cleaning process laterof the board once you are done.
[* black] Put soldersome flux on the leads of the bad capacitorold capacitors. This will help flowmelt the old solder to make removingon the old caps with less effort, without adding new solder. solder easier.flux on the leads of the bad capacitor.
[* icon_reminder]
If you do not have flux to do this, you can useflux, adding a small amount of fresh solder to do this toowill make the old solder melt as well.
[* icon_note] You will have to putApply flux on a few times during this repair due to the age of the solder. Put flux on as often as you need. Tryrepair. Do not to use too much, as this willmay complicate the cleaning process laterof the board once you are done.