Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #13

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[* black] You may like to mark the lead polarity on the back of the power supply board with permanent marker. But if you look at the top of the board you'll see that the polarity is printed there for each capacitor, and after you remove the capacitors you'll see that it's printed on the bottom too -- so why bother?this is only if you really want to do this.
[* black] You may like to mark the lead polarity on the back of the power supply board with permanent marker. But if you look at the top of the board you'll see that the polarity is printed there for each capacitor, and after you remove the capacitors you'll see that it's printed on the bottom too -- so why bother?this is only if you really want to do this.
[* icon_note] Putting the capacitor in the wrong way will cause the capacitor to explode. Permanent marker on the solder mask will not affect the rest of the board.