Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #13

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] (Optional) Capacitor polarity marking
[* icon_note] '''If the PCB is marked to avoid mis-installation, these marks will come off when the capacitor is soldered into the board.'''
[* black]
If you are unsure of the position of the capacitors, writetake a note of the polarity on the solder mask as a reference using aPCB with permanent marker. If you install'''If the capacitors are installed incorrectly, they will explode when given power. '''Note:''' These marks will wear off when the capacitor is soldered in.power.'''
[* icon_note] '''If the PCB is marked to avoid mis-installation, these marks will come off when the capacitor is soldered into the board.'''
[* black]
If you are unsure of the position of the capacitors, writetake a note of the polarity on the solder mask as a reference using aPCB with permanent marker. If you install'''If the capacitors are installed incorrectly, they will explode when given power. '''Note:''' These marks will wear off when the capacitor is soldered in.power.'''