Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #13

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Mark the position of the old capacitors
[* blackicon_note] If you are not sure about your ability to putunsure of the caps in correctly, you may wish to referenceposition of the old capacitors and notecapacitors, write the original installation. Do this withpolarity on the solder mask as a reference using a permanent marker. TheIf you install the capacitors incorrectly, they will explode when given power. '''Note:''' These marks will comewear off once you start soldering in the capacitors.
[* icon_note] Putting
when the capacitor in the wrong way will cause the capacitor to explode. Permanent marker on the solder mask will not affect the rest of the boardis soldered in.
[* blackicon_note] If you are not sure about your ability to putunsure of the caps in correctly, you may wish to referenceposition of the old capacitors and notecapacitors, write the original installation. Do this withpolarity on the solder mask as a reference using a permanent marker. TheIf you install the capacitors incorrectly, they will explode when given power. '''Note:''' These marks will comewear off once you start soldering in the capacitors.
[* icon_note] Putting
when the capacitor in the wrong way will cause the capacitor to explode. Permanent marker on the solder mask will not affect the rest of the boardis soldered in.