Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #13

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] BeginningOptional: Mark the capacitor replacement: Markposition of the capacitor polarityold capacitors
[* black] YouIf you are not sure about your ability to put the caps in correctly, you may wish to markreference the lead polarity on the back ofold capacitors and note the power supply boardoriginal installation. Do this with permanent marker, and use this to install the capacitor, as to avoid putting it in wrong. Youmarker. The marks will no longer need thiscome off once you have solderedstart soldering in the capacitor incapacitors.
[title] BeginningOptional: Mark the capacitor replacement: Markposition of the capacitor polarityold capacitors
[* black] YouIf you are not sure about your ability to put the caps in correctly, you may wish to markreference the lead polarity on the back ofold capacitors and note the power supply boardoriginal installation. Do this with permanent marker, and use this to install the capacitor, as to avoid putting it in wrong. Youmarker. The marks will no longer need thiscome off once you have solderedstart soldering in the capacitor incapacitors.
[* icon_note] Putting the capacitor in the wrong way will cause the capacitor to explode. Permanent marker on the solder mask will not affect the rest of the board.