Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações neste passo

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Removing theRemove the power supply
[* black] Remove the 4 screws from the power supply. '''Important: Theicon_caution] '''The black screw (marked in Blue) is a ground screw, and will onlyscrew. It does not fit in one place. Keepanywhere else. Do not lose this screw separated fromscrew!'''
[* icon_note] Only lift
the rest ofpower supply up at a slight angle. Lifting it up too much can damage the screws. It is marked in blue.'''power supply and potentially the video processing board.
[* black] LiftRemove the 4 screws from the power supply. Once this is done, lift the power supply up at a slight angle to clear the mounting holes and start toso you can remove it. If you lift the board out too much, you may damagepower supply from the pins on the board, and potentially the video processing boardmonitor.
[title] Removing theRemove the power supply
[* black] Remove the 4 screws from the power supply. '''Important: Theicon_caution] '''The black screw (marked in Blue) is a ground screw, and will onlyscrew. It does not fit in one place. Keepanywhere else. Do not lose this screw separated fromscrew!'''
[* icon_note] Only lift
the rest ofpower supply up at a slight angle. Lifting it up too much can damage the screws. It is marked in blue.'''power supply and potentially the video processing board.
[* black] LiftRemove the 4 screws from the power supply. Once this is done, lift the power supply up at a slight angle to clear the mounting holes and start toso you can remove it. If you lift the board out too much, you may damagepower supply from the pins on the board, and potentially the video processing boardmonitor.