Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações neste passo

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Removing the power supply
[* black] Remove the 4 screws from the power supply. '''Important: The black screw at bottom left is largera ground screw, and will fit only fit in one place. Keep this hole. '''The screw separated from the rest of the screws. It is marked in blue is a ground screw. This will only fit in this holeblue.'''
[* black] Lift the power supply up at a rightslight angle to clear the mounting holes and start to remove it. Do notIf you lift the board out too much ormuch, you risk bendingmay damage the pins on the board, and damaging pinspotentially the video processing board.
[* black] Remove the 4 screws from the power supply. '''Important: The black screw at bottom left is largera ground screw, and will fit only fit in one place. Keep this hole. '''The screw separated from the rest of the screws. It is marked in blue is a ground screw. This will only fit in this holeblue.'''
[* black] Lift the power supply up at a rightslight angle to clear the mounting holes and start to remove it. Do notIf you lift the board out too much ormuch, you risk bendingmay damage the pins on the board, and damaging pinspotentially the video processing board.