Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações neste passo

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Removing the power supply
[* black] Remove the 4 screws from the power supply. The screw at bottom left is larger and will fit only in this hole. '''The screw marked in blue is a ground screw. This will only fit in this hole.'''
[* black] Lift the power supply up at a right angle to clear the mounting holes and start to remove it. Do not lift too much.
[* icon_reminder] '''Important:''' There are multiple revisions of this power supply. If your power supply has this capacitor (marked in red), this capacitor has to be changed. Some do not have this capacitor, while others will. This is more commonly found in early production AL2216W's. Newer ones will likely have the power supply that lacks this capacitor
much or you risk bending and damaging pins.
[* black] Lift the power supply up at a right angle to clear the mounting holes and start to remove it. Do not lift too much.
[* icon_reminder] '''Important:''' There are multiple revisions of this power supply. If your power supply has this capacitor (marked in red), this capacitor has to be changed. Some do not have this capacitor, while others will. This is more commonly found in early production AL2216W's. Newer ones will likely have the power supply that lacks this capacitor
much or you risk bending and damaging pins.

Imagem 1

Versão Antiga

Nova Versão