Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #12

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Identify the power supply
[* icon_caution] '''If any of the capacitors have bulged, they may still have a charge. Handle the power supply with extreme caution!'''
[* black] As you keep that plate lifted up, maneuver the shield covering the power suppy and control boards up. After you have this removed, identify the power supply.
[* black] After you remove the shield identify all of the bad capacitor, '''makecapacitors and replace them all. You can go up as much as you want to the points that the new caps will not fit the existing points. '''Make sure you get the right one,ones or double the uF ratings. If you use a smaller capacitor it will explode when the monitor is turned on'''.bulge and explode.'''
[* icon_note] You can gowill probably have to double up in voltage andthe uF ratings as much as you want, butrating on the new capacitors have to fit in place wherecapacitors, seeing as the old capacitor is. Capacitors as of 2013(when I did this)Acer rated ones are much smaller then the factory ones, sovery hard to find. '''If you can go over more easily and fitdecide to double them now. '''Youyou can not go under on uF or voltage, or the capacitor will explode.'''
[* icon_note] The original capacitors Acer used go as follows:2xthe following capacitors at the time: 2x 25V 1000uF capacitors, 1x 10V 1000uF capacitor, 2x 25V 220uF capacitors if you intend to match the factory specified capacitor ratings. If you double them, make sure you exceed the original uF and voltages and not go under or they will fail when the monitor is turned on.
[* icon_caution] '''If any of the capacitors have bulged, they may still have a charge. Handle the power supply with extreme caution!'''
[* black] After you remove the shield identify all of the bad capacitor, '''makecapacitors and replace them all. You can go up as much as you want to the points that the new caps will not fit the existing points. '''Make sure you get the right one,ones or double the uF ratings. If you use a smaller capacitor it will explode when the monitor is turned on'''.bulge and explode.'''
[* icon_note] You can gowill probably have to double up in voltage andthe uF ratings as much as you want, butrating on the new capacitors have to fit in place wherecapacitors, seeing as the old capacitor is. Capacitors as of 2013(when I did this)Acer rated ones are much smaller then the factory ones, sovery hard to find. '''If you can go over more easily and fitdecide to double them now. '''Youyou can not go under on uF or voltage, or the capacitor will explode.'''
[* icon_note] The original capacitors Acer used go as follows:2xthe following capacitors at the time: 2x 25V 1000uF capacitors, 1x 10V 1000uF capacitor, 2x 25V 220uF capacitors if you intend to match the factory specified capacitor ratings. If you double them, make sure you exceed the original uF and voltages and not go under or they will fail when the monitor is turned on.
[* icon_caution] '''If any of the capacitors have bulged, they may still have a charge. Handle the power supply with extreme caution!'''