Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #12

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Identify the power supply
[* icon_caution] '''If any of the capacitors have bulged, assumeyou see bulged capacitors, treat them as if they have residual charge. Furthermore, handle the power supply from the sides and avoid contact with the capacitorsThis may mean discharging them as a safety precation.'''
[* icon_caution] '''In most cases, the filter capacitor on the primary side of the power supply does notNOT need to be replaced. This capacitor should only be replaced IF it is bulging andIf you have aneed to replace this capacitor, discharge tool on handit before replacement.'''
[* icon_caution] '''If any of the capacitors have bulged, assumeyou see bulged capacitors, treat them as if they have residual charge. Furthermore, handle the power supply from the sides and avoid contact with the capacitorsThis may mean discharging them as a safety precation.'''
[* icon_caution] '''In most cases, the filter capacitor on the primary side of the power supply does notNOT need to be replaced. This capacitor should only be replaced IF it is bulging andIf you have aneed to replace this capacitor, discharge tool on handit before replacement.'''
[* icon_caution] '''Original capacitor ratings (primary): 25V 1000uF (X2), 10V 1000uF (X1), 25V 220uF (X2)'''
[* icon_reminder] '''IfIf you cannot find the original capacitors easily (or they are more expensive)capacitors, it is okay to usesubstitute the original capacitors with a higher uF and voltage rating. As long as they fit, you shouldlarger replacements. It is not have any issues.'''necessary to match the capacitors used by the factory.
[* icon_note] Thered] This capacitor marked in red is only used on older power supply boards. Never revisions of the power supply used inIf your board has this monitor no longer have this capacitor. Replacementcapacitor, replacement is recommended if you have it, but is generally okay to ignorenot required unless it looks like itthere is obvious bulging or has leaking electrolytesleakage.
[* black] With the power supply shield removed from the monitor, identify the power supply. Write down whichAlong with the capacitors you need so you know what to get if you are buying them locallypreviously mentioned, take note of any additional capacitors that were not mentioned (ex: Capacitor by the inverter coil).
[* icon_reminder] '''IfIf you cannot find the original capacitors easily (or they are more expensive)capacitors, it is okay to usesubstitute the original capacitors with a higher uF and voltage rating. As long as they fit, you shouldlarger replacements. It is not have any issues.'''necessary to match the capacitors used by the factory.
[* icon_note] Thered] This capacitor marked in red is only used on older power supply boards. Never revisions of the power supply used inIf your board has this monitor no longer have this capacitor. Replacementcapacitor, replacement is recommended if you have it, but is generally okay to ignorenot required unless it looks like itthere is obvious bulging or has leaking electrolytesleakage.
[* black] With the power supply shield removed from the monitor, identify the power supply. Write down whichAlong with the capacitors you need so you know what to get if you are buying them locallypreviously mentioned, take note of any additional capacitors that were not mentioned (ex: Capacitor by the inverter coil).