Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #12

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Identify the power supply
[* icon_caution] '''If any of the capacitors have bulged, assume there is athey have residual charge remaining. Handlecharge. Furthermore, handle the power supply byfrom the sides and do not touchavoid contact with the capacitor leads, and use extreme cautioncapacitors.'''
[* black] Withicon_caution] '''In most cases, the power supply shield removed fromfilter capacitor on the monitor, identifyprimary side of the power supply. Take a note of the original capacitorssupply does not need to be replaced. This capacitor should only be replaced IF it is bulging and bring this list to an electronics store or buy the caps you need online.have a discharge tool on hand.'''
[* icon_caution] '''Original capacitor ratings (primary): 25V 1000uF (X2), 10V 1000uF (X1), 25V 220uF (X2)'''

[* icon_reminder] '''If you cannot find the original capacitors oreasily (or they cost too much and a higher capacity equivalentare more expensive), it is available for less, you can substitute the originals for onesokay to use capacitors with a higher rating, asuF and voltage rating. As long as they fit the boardfit, you should not have any issues.'''
[* icon_note] The capacitor marked in red is only on older power supply boards. If you have a newer board, it is very unlikely to have this capacitorNever revisions of the power supply used in place. Ifthis monitor no longer use this cap. Replacement is recommended if you have it, you will needbut is generally okay to replaceignore unless it as welllooks like it is bulging or has leaking electrolytes.
[* icon_note] You only likely need to changeblack] With the following capacitors: 2x 25V 1000uF, 1x 10V 1000uF, 2x 25V 220uF. If any additionalpower supply shield removed from the monitor, identify the power supply. Write down which capacitors are bad or you wishneed so you know what to change all of the small caps, take note of the other capsget if you may wish to replace. Replacement of the filter capacitor should be limited to cases where it has to be changed only, due to the costare buying them locally.
[* icon_caution] '''If any of the capacitors have bulged, assume there is athey have residual charge remaining. Handlecharge. Furthermore, handle the power supply byfrom the sides and do not touchavoid contact with the capacitor leads, and use extreme cautioncapacitors.'''
[* black] Withicon_caution] '''In most cases, the power supply shield removed fromfilter capacitor on the monitor, identifyprimary side of the power supply. Take a note of the original capacitorssupply does not need to be replaced. This capacitor should only be replaced IF it is bulging and bring this list to an electronics store or buy the caps you need online.have a discharge tool on hand.'''
[* icon_caution] '''Original capacitor ratings (primary): 25V 1000uF (X2), 10V 1000uF (X1), 25V 220uF (X2)'''

[* icon_reminder] '''If you cannot find the original capacitors oreasily (or they cost too much and a higher capacity equivalentare more expensive), it is available for less, you can substitute the originals for onesokay to use capacitors with a higher rating, asuF and voltage rating. As long as they fit the boardfit, you should not have any issues.'''
[* icon_note] The capacitor marked in red is only on older power supply boards. If you have a newer board, it is very unlikely to have this capacitorNever revisions of the power supply used in place. Ifthis monitor no longer use this cap. Replacement is recommended if you have it, you will needbut is generally okay to replaceignore unless it as welllooks like it is bulging or has leaking electrolytes.
[* icon_note] You only likely need to changeblack] With the following capacitors: 2x 25V 1000uF, 1x 10V 1000uF, 2x 25V 220uF. If any additionalpower supply shield removed from the monitor, identify the power supply. Write down which capacitors are bad or you wishneed so you know what to change all of the small caps, take note of the other capsget if you may wish to replace. Replacement of the filter capacitor should be limited to cases where it has to be changed only, due to the costare buying them locally.