Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #7

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Remove the video connection screws
[* icon_reminder] If you do not have a Nut driver on hand, needlenoose plyers can also be used for this step.
[*
black] Remove the 4 screw pins for the video cables from the monitor. Use a '''5mm nut''' bitNut''' bit/driver to remove the pins.
[* icon_note] If you do not have a 5mm Hex driver on hand, needlenoose plyers will work in place of
screw pins from the Hex bitpower supply shield.
[* icon_reminder] If you do not have a Nut driver on hand, needlenoose plyers can also be used for this step.
[*
black] Remove the 4 screw pins for the video cables from the monitor. Use a '''5mm nut''' bitNut''' bit/driver to remove the pins.
[* icon_note] If you do not have a 5mm Hex driver on hand, needlenoose plyers will work in place of
screw pins from the Hex bitpower supply shield.