Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Removing the stand
[* black] Remove the stand from the monitor. The 4 screws that have to be removed are marked. They do not have to come out or be reinstalled in a particular order.
[* icon_note] ThisThe monitor in this guide is missing the hinge cover, nor did I get one with one with it. If you have one on yours, snapcover. To remove it, unclip it off with your fingers.
[* icon_note] Here's my [https://www.dropbox.com/s/dztgcjcd4imkdtl/Capacitor%20shopping%20list%203x5.docx?dl=0|shopping list] for retail capacitor purchases. If you don't see them at
from the time double them further, but make sure they'll actually fit. It's designed to be printed on an index card that's 3x5" for portabilitypoints marked in red.
[* black] Remove the stand from the monitor. The 4 screws that have to be removed are marked. They do not have to come out or be reinstalled in a particular order.
[* icon_note] ThisThe monitor in this guide is missing the hinge cover, nor did I get one with one with it. If you have one on yours, snapcover. To remove it, unclip it off with your fingers.
[* icon_note] Here's my [https://www.dropbox.com/s/dztgcjcd4imkdtl/Capacitor%20shopping%20list%203x5.docx?dl=0|shopping list] for retail capacitor purchases. If you don't see them at
from the time double them further, but make sure they'll actually fit. It's designed to be printed on an index card that's 3x5" for portabilitypoints marked in red.

Imagem 1

Versão Antiga

Nova Versão