Alterações no passo nº 2
Linhas do passo
| - | [title] |
|---|---|
| + | [title] Back Cover Removal |
| [* black] The plastic cover with the "logi" logo is mainly glued on. on the top of the remote, there is a little tab. | |
| [* black] Start prying with a soft plastic plectrum or a sharp knife at the bottom edge. | |
| [* black] Be careful to not damage the plastic like I did - it's very soft! | |
| [* black] You can use the sticky back to keep all the screws we will remove in one place :) |