Alterações no passo nº 1
Edição por Cate Woods —
Edição aprovada por Cate Woods
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Identify the Hex nut within the inside of the chuck of the drill. | |
| - | [* black] Using the Allen key, insert it into the chuck to loosen the Hex nut. ***Note:*** the Hex nut is reversed threaded so to loosen the nut simply twist the Allen key in the opposite direction. |
| + | [* black] Insert the 4mm Allen key into the chuck to loosen the Hex nut. |
| + | [* icon_note] The Hex nut is reversed threaded. To loosen the nut, simply twist the 4mm Allen key in the opposite direction. |