Conserte seus objetos Comunidade Loja

Alterações no passo nº 5

Edição por NorthernBigDummy —

Edição aprovada por NorthernBigDummy

Antes
Depois
Sem alteração

Linhas do passo

[title] Remove D5 Capacitor
-[* black] I used a soldering gun to and wick to remove as much solder from back side of board where D5 is marked.
+[* black] I used a soldering gun to wick and to remove as much solder from back side of board where D5 is marked.
[* black] After solder is removed, I gently bent the capacitors pins so they were straightened and ready to remove from hole.
-[* black] Adding flux to the board, heated the pins and use a [product|IF145-020|tweezers] to pull on the D5 capacitor.
+[* black] Add flux to the board, heat the capacitor's pins, and use a [product|IF145-020|tweezers] to pull on the D5 capacitor.