Alterações no passo nº 5
Linhas do passo
| [title] Remove D5 Capacitor | |
| [* black] I used a soldering gun to and wick to remove as much solder from back side of board where D5 is marked. | |
| [* black] After solder is removed, I gently bent the capacitors pins so they were straightened and ready to remove from hole. | |
| - | [* black] Adding flux to the board, heated the pins and use a tweezers to pull on the D5 capacitor. |
| + | [* black] Adding flux to the board, heated the pins and use a [product|IF145-020|tweezers] to pull on the D5 capacitor. |