Conserte seus objetos Comunidade Loja

Alterações no passo nº 8

Edição por Sarah Westberg —

Edição aprovada por Sarah Westberg

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Insert your jimmy tool between the gray top cover and the white outer cover.
-[* black] Pop the hidden tabs holding the cover in place and remove it.
+[* black] Insert the Jimmy between the gray grille cover and the top of the device.
+[* black] Work your way around the grille cover with the Jimmy to release the clips holding it in place.
[* icon_reminder] Take note of the placement of the tabs, as they are keyed and need to go back in the exact way they came out.
+[* black] Remove the grille cover gently as it is connected by a ribbon cable.
[* icon_caution] Be careful not to put too much strain on the ribbon cable as it may break.