Conserte seus objetos Comunidade Loja

Alterações no passo nº 15

Edição por David Kamp —

Edição aprovada por David Kamp

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Use your hands to pry apart twe two marked tabs holding the power board in place
-[* icon_note] Use one hand to push on the tabs while gently lifting with your other hand to keep them from resetting
-[* icon_note] There is a third tab that the board will slide out from under when the other two are released
-[* icon_caution] After releasing the two tabs shown, the power board will be free. Do not fully remove it yet, you must remove the two cable connectors first.
+[* red] Use your hands to pry apart the two tabs on opposite sides of the power board.
+[* icon_note] Use one hand to push on the tabs while gently lifting with your other hand to keep them from resetting.
+[* icon_note] There is a third tab that the board will slide out from under when the other two are released.
+[* icon_caution] After releasing the two tabs shown, the power board will be free. Do not pull hard on the attached cables as that can damage them as well as other parts.