Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Sarah Westberg —

Edição aprovada por Sarah Westberg

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Remove the battery using a standard spudger.
- [* icon_caution] Be careful not to damage any surrounding components with physical force.
- [* icon_note] You can use a blow dryer or heat gun to melt the adhesive holding the battery to the heat-sensing pad if it will not come out easily.
+[* black] Use a spudger to pry the battery from the case.
+ [* icon_caution] Be careful not to damage any surrounding components.
+ [* icon_note] There is an adhesive holding the battery down. Use an [guide|11677|iOpener|new_window=true] if it is too difficult to remove the battery with the spudger alone.