Ir para o conteúdo principal

Alterações no passo #14

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Insert wisdom here.
+[* black] Lift the side of the logic board opposite the ports out of the upper case.
+[* black] Rotate the logic board away from the upper case until the ports clear the lip molded in the upper case.
+[* black] Pull the logic board and DC-in board away from the edge of the upper case as one piece.
+[* icon_reminder] The DC-in board may get accidentally disconnected during this process. As a precaution, be sure the DC-in board connector is securely seated in its socket before lowering the logic board back into the upper case.