Skip to main content

Alterações no passo #2

Edição por Andrew Bookholt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] The upper case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.
[*
black] Slightly lift the lower case near the vent opening.
[* black] Continue running your fingers between the lower
and push it towardupper cases until the rearupper case pops off its retaining clips.
[* icon_note] The location
of these three clips is shown in the computer to free the mounting tabsthird picture.
[* icon_caution] The upper case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.
[*
black] Slightly lift the lower case near the vent opening.
[* black] Continue running your fingers between the lower
and push it towardupper cases until the rearupper case pops off its retaining clips.
[* icon_note] The location
of these three clips is shown in the computer to free the mounting tabsthird picture.