Ir para o conteúdo principal

Alterações no passo #1

Edição por Walter Galan

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* red] Use a 1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).
-[* icon_note] If you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.
+[* red] Use a 1.5 mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).
+[* icon_note] If you don't have a 1.5 mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.