Conserte seus objetos Comunidade Loja

Alterações no passo nº 6

Edição por Timothy Marroquin —

Edição aprovada por Timothy Marroquin

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Place the reed plates back onto the comb and use the appropriate screws along with the Phillips head screwdriver to fasten them in place.
-[* orange] Do the same with the cover plates (the numbers on the plates should be in line with the holes).
+[* red] Place the reed plates back onto the comb and use the 8mm Phillips #1 screws to fasten them in place.
+[* orange] Do the same with the cover plates (the numbers on the plates should be in line with the holes) using the 11mm Phillips #1 screws.