Alterações no passo nº 5
Edição por Timothy Marroquin —
Edição aprovada por Timothy Marroquin
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] With the reeds on the reed plate facing upward, use a thin implement (such as a knife) to prop up the warped reed. | |
| [* black] Use the flat head screwdriver to gently bend the reed into uniformity. | |
| - | [* |
| + | [* icon_caution] This process can take time and requires patience in order to keep the reeds from further damage. |
| [* black] The end product should be a roughly straight reed that just barely hovers over the cavity below. |