Alterações no passo nº 1
Edição por Wayne Seltzer —
Edição aprovada por Wayne Seltzer
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Test wiring | |
| [* black] Connect the hot side of an AC power cord to the Line In to the W-11 | |
| [* black] Connect the neutral side to a light bulb, lamp, etc. | |
| - | [* black] Connect the Line Out of the WC-11 to the other side of the light bulb |
| + | [* black] Connect the Line Out of the WC-11 to the other side of the light bulb. Use a jumper wire. |
| [* black] Connect the oscilloscope leads to the hot and neutral sides of the light bulb. | |
| + | [* black] Be sure that all the wiring is secure so that nothing shorts out during the testing. |
| + | [* black] Plug in the AC plug to a 110 volt outlet |