Alterações no passo nº 4
Edição por Kendra Ledlow —
Edição aprovada por Kendra Ledlow
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Place gate handle and rod in newly aligned position. You can check alignment by fitting the rod into the latching mechanism. | |
| [* black] Use one hand to continue hold the gate handle and rod in place while marking bolt holes. You will use these marked holes to drill guide holes in the next step. | |
| + | [* black] After marking, set gate handle and rod to the side until step 6. |