Ir para o conteúdo principal

Alterações no passo #4

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the tip of a spudger to peel back the piece of foam tape covering the optical drive thermal sensor.
[* black] Use the flat end of a spudger to carefully pry the thermal sensor up off the adhesive securing it to the optical drive.
[* black] If you have a diskdisc or anything else stuck inside your optical drive, we have a [guide|772|guide] to fix it.
[* black] If you have a diskdisc or anything else stuck inside your optical drive, we have a [guide|772|guide] to fix it.