Alterações no passo nº 5
Edição por Deborah Kalu —
Edição aprovada por Deborah Kalu
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Tape the cured area with a shaping strip. | |
| [* icon_note] It is optional to use the shaping strip on a flat surface. The strip aids in molding the epoxy to precise curves. If a shaping strip is not available painter's tape can be used. | |
| - | [* black] Allow to dry for 30-45 minutes |
| + | [* black] Allow to dry for 30-45 minutes, remove strips. |
| + | [* icon_note] Before removing Strip, lift and feel the epoxy, and ensure it is dry. |