Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #11

Edição por Jake Devincenzi

Edição aprovada por Jake Devincenzi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] FrontalTurning our attention back to the rest of the device, we remove the Frogger-esque air intake cover from the Shield.
[* black] Our fingers are crossed for aftermarket replacements in various colors.
[* black] We attempt to spudger the frontal
antenna array adhered to the central battery cell infree from its adhesive on the battery tray.
[* black] Possibly GPS, as it is horizontal-ish? There are two other antennae framing
Unfortunately, the display. None of these can be removed beforeconnectors for the heatsink, which basically locks most components in at this pointantennas are all trapped under the heat sink, for now.
[* black] FrontalTurning our attention back to the rest of the device, we remove the Frogger-esque air intake cover from the Shield.
[* black] Our fingers are crossed for aftermarket replacements in various colors.
[* black] We attempt to spudger the frontal
antenna array adhered to the central battery cell infree from its adhesive on the battery tray.
[* black] Possibly GPS, as it is horizontal-ish? There are two other antennae framing
Unfortunately, the display. None of these can be removed beforeconnectors for the heatsink, which basically locks most components in at this pointantennas are all trapped under the heat sink, for now.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Nenhuma imagem anterior

Adicionado