Ir para o conteúdo principal

Alterações no passo #8

Edição por johnsawyercjs

Edição aprovada por Taylor Dixon

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Once the cables are free, set the drive cage aside.
-[* black] To remove the hard drives from the cages, remove the four screws on the sides of the cage that are connected to the drives, than slide the drives out.
-[* black] The two cages are cross compatible and can be put in either rack.
-[* black] The MDD does not have a 128GB drive limit like older macs, My MDD has 3 Drives (A 400GB Hitatchi Deskstar, 40GB Seagate Baracuda 7200.7, and a 30GB Quantum Fireball LCT).
+[* black] To remove the hard drives from the cages, remove the four screws on the sides of the cage that are connected to the drives, then slide the drives out.
+[* black] The two cages are cross compatible and can be put in either location.
+[* black] The MDD does not have a 128GB drive limit like older Macs. My MDD has 3 drives (a 400GB Hitatchi Deskstar, 40GB Seagate Barracuda 7200.7, and a 30GB Quantum Fireball LCT).
[* black] Note the ID jumpers on the two drive set. One is set to Master, the other to slave. A single drive can be set to Cable Select.