Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações no passo #8

Edição por Andrew Bookholt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] RemovingCarefully pull the logic board assemblyaway from the plasticinner chassis. As you pull the board away, be sure not to bend the pins on the Wi-Fi and volume knob interconnect boards.
[* black] Disconnect a few cablesAfter separating the two pieces slightly, disconnect the button panel and liftthe speaker connectors from the logic board up outboard.
[* black] Hey look, a MicroSD card!
[* blue] A row of sockets near the MicroSD socket allow the addition of a transmitter & receiver as well as providing +3V DC and ground.
[* red] A message
from the chassisdesigner. How cute.
[* black] RemovingCarefully pull the logic board assemblyaway from the plasticinner chassis. As you pull the board away, be sure not to bend the pins on the Wi-Fi and volume knob interconnect boards.
[* black] Disconnect a few cablesAfter separating the two pieces slightly, disconnect the button panel and liftthe speaker connectors from the logic board up outboard.
[* black] Hey look, a MicroSD card!
[* blue] A row of sockets near the MicroSD socket allow the addition of a transmitter & receiver as well as providing +3V DC and ground.
[* red] A message
from the chassisdesigner. How cute.