Alterações no passo #1
Edição por Jake Devincenzi —
Edição aprovada por Jake Devincenzi
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* icon_reminder] Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters. |
| [* red] Remove the hex head bolt from the top of the access door on the pump head. |
| [* icon_reminder] On reassembly, this bolt should be hand-tight. |