Alterações no passo nº 7
Edição por Curt Reitenbach —
Edição aprovada por Curt Reitenbach
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Verify solder bridge is repaired. | |
| - | [* black] NOTE: Verify the circuit board does not have any current supplied to it prior to performing next step. |
| - | [* black] Connect black probe to the circuit board where the solder bridge was. |
| + | [* black] NOTE: Verify the circuit board does not have any current supplied to it prior to performing next step. |
| + | [* black] Connect black probe to the circuit board where the solder bridge was. |
| + | [* black] Connect red probe to the circuit board above where the solder bridge was. |