Alterações no passo nº 6
Edição por Bill Gilbert —
Edição aprovada por Bill Gilbert
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Connect the red (positive) probe to the Voltage and Resistance Socket. | |
| [* black] Connect the black (negative) probe to the Common/Ground Socket. | |
| [* red] Set the multimeter knob for continuity testing. This is typically labeled with diode/audio symbols. | |
| [* icon_note] As shown in the photo, the multimeter will read "OL" if the steps above have been followed properly. | |
| - | [* |
| + | [* icon_note] To ensure the functionality of the multimeter, touch the two probes together and an audible beeping sound should be emitted. |