Alterações no passo nº 4
Edição por Bill Gilbert —
Edição aprovada por Bill Gilbert
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Resolder the original connection |
|---|---|
| [* black] Apply the soldering iron to the contact point. | |
| [* black] Once the contact point is hot, reapply the solder to the contact point. | |
| [* icon_caution] The repaired area will be very hot! Avoid touching the area being repaired. | |
| [* black] Continue applying the solder to the contact point until the pin is solidly attached and the rails are separate from each other. | |
| [* icon_note] Step 7 verifies circuit continuity. |