Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Steven —

Edição aprovada por Steven

Antes
Depois
Sem alteração

Linhas do passo

[* black] Apply soldering iron to the contact point.
[* black] Once the contact point is hot, reapply the solder to the contact point.
[* icon_caution] The repaired area will be very hot! Avoiding touching the area being repaired.
-[* black] Continue applying the solder to the contact point until the pin is attached and the points seem both solidly attached and separate from each other.
+[* black] Continue applying the solder to the contact point until the pin is attached and the points are both solidly attached and the rails are separate from each other.
[* icon_note] Step 7 verifies circuit continuity.