Alterações no passo nº 4
Edição por Curt Reitenbach —
Edição aprovada por Curt Reitenbach
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Reapply solder to the contact point. | |
| [* black] Heat the solder on top of the solder bridge by pushing the soldering iron on the affected area. | |
| [* icon_caution] The repaired area will be very hot! Avoiding touching the area being repaired. | |
| [* black] Continue applying the solder to the bridge until the solder bridge circuit is complete. | |
| + | [* icon_note] Step 7 verifies circuit continuity. |