Alterações no passo nº 3
Linhas do passo
| - | [* black] |
|---|---|
| + | [* black] Heat the solder wick on top of the solder bridge by pushing the soldering iron on the affected area. |
| [* icon_caution] The solder wick will be very hot! Avoiding touching the area of the wick near the soldering iron. | |
| [* black] Continue to apply the soldering iron to the solder bridge until the solder is melted and absorbed by the wick. | |
| [* icon_note] Soldering flux can also be used here to aid in the desoldering process by reducing oxide films. |