Ir para o conteúdo principal

Alterações neste passo

Edição por mochi19

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Using the same process from the previous step, wedge the spudger between the heat sinkclamps and the metal cover on the bottom side (as shown in the picture).
[* black] With your other hand, pull up on the top right corner of the thicker metal cover. Lift off the metal covercover to lift it off.
[* black] Using the same process from the previous step, wedge the spudger between the heat sinkclamps and the metal cover on the bottom side (as shown in the picture).
[* black] With your other hand, pull up on the top right corner of the thicker metal cover. Lift off the metal covercover to lift it off.