Ir para o conteúdo principal

Alterações no passo #3

Edição por mochi19

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] With one hand, hold the main board’s protective metal cover. With your other hand, wedge the spudger in between the right side of the protective cover and the thin metalheat sink (metal sheet surrounding itit). With the spudger in place, gently lift the upper portion of the metal cover. The cover should detach from the right side.
[* black] With one hand, hold the main board’s protective metal cover. With your other hand, wedge the spudger in between the right side of the protective cover and the thin metalheat sink (metal sheet surrounding itit). With the spudger in place, gently lift the upper portion of the metal cover. The cover should detach from the right side.